Download PDFOpen PDF in browser

Design of Flexible Implants for Preservation of Physiological Mobility Exploiting Additive Manufacturing

4 pagesPublished: June 13, 2017

Abstract

Due to tumors or bone fractures caused by high mechanical impact, the affected tissue has to be removed. The implantation of a stabilizing replacement is a common solution for defect bridging and support of bone ossification. Preserving the physiological mobility after the treatment could prevent stress shielding or overload of the surrounding muscles and ligaments. [1]
In case of a critical vertebral body defect, the body and its attached disks have to be removed. Thereafter the adjacent vertebral bodies are braced together resulting in limited physiological spine movability. A flexible implant adapted to and preserving the patient-specific physiological spine mobility would be a desirable solution. [2] [3]
To realize such an implant additive manufacturing (AM) can be used as a key technology. AM offers the following advantages: The build-up of almost any desired complex geometry shape, without additional costs. A monolithic geometry with enhanced functionalities combined in only one part and one material. A cost-efficient implant individualization based on patient specific requirements. [4]
Relating to flexibility, the integration of solid state hinges tailored to the patient specific physiological mobility is possible. Hereby, assembly work is neglectable and abrasion will be prevented due to the absence of friction partners. A challenge to overcome will be the durability of the design. It is limited by the fatigue of the material caused by implant motion.

Keyphrases: additive manufacturing, flexible implant, patient specific, vertebral body

In: Klaus Radermacher and Ferdinando Rodriguez Y Baena (editors). CAOS 2017. 17th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery, vol 1, pages 70-73.

BibTeX entry
@inproceedings{CAOS2017:Design_Flexible_Implants_Preservation,
  author    = {Martin Kimm and Lucas Jauer and Christian Hinke and Johannes Henrich Schleifenbaum and Reinhart Poprawe},
  title     = {Design of Flexible Implants for Preservation of Physiological Mobility Exploiting Additive Manufacturing},
  booktitle = {CAOS 2017. 17th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery},
  editor    = {Klaus Radermacher and Ferdinando Rodriguez Y Baena},
  series    = {EPiC Series in Health Sciences},
  volume    = {1},
  publisher = {EasyChair},
  bibsource = {EasyChair, https://easychair.org},
  issn      = {2398-5305},
  url       = {/publications/paper/pC},
  doi       = {10.29007/jlb9},
  pages     = {70-73},
  year      = {2017}}
Download PDFOpen PDF in browser