Download PDFOpen PDF in browser

Experimental Analysis of the Influence of Discharge Gap on EDM Performance

EasyChair Preprint 3363

7 pagesDate: May 10, 2020

Abstract

In order to reduce the machining time and improve the surface quality of holes, a high speed self adjusting electrical discharge machining (EDM) approach is needed with independent flushing system that were able to remove the debris in the machining process. With the change in the gap distance and depth of the hole drilled, the electrode automatically adjusts the gap with the help of a linear actuator. For that, the optimum gap distance for getting maximum result is crucial. Taguchi L27 orthogonal array technique is used for the preliminary experimental analysis. The study revealed that discharge gap which is proportional to the gap voltage is the most influential parameter that affects the surface finish and material removal rate. The formation mechanism of the hole in the copper plate had found out, in order to get the optimum gap distance for the maximum MRR, TWR, and ROC. The results from the comparison experiment shows that the best result will be get at 0.5mm gap distance and this can be taken as the optimum gap distance for the automatic feeding mechanism. In addition, low voltage and current would benefit for the EDM process working in micro level and for the removal of the recast layer.

Keyphrases: Automatic Feeding Mechanism, EDM, MRR, ROC, TWR

BibTeX entry
BibTeX does not have the right entry for preprints. This is a hack for producing the correct reference:
@booklet{EasyChair:3363,
  author    = {Jestin Jose and Lijo Paul},
  title     = {Experimental Analysis of the Influence of Discharge Gap on EDM Performance},
  howpublished = {EasyChair Preprint 3363},
  year      = {EasyChair, 2020}}
Download PDFOpen PDF in browser